Saturn Launch Vehicle Digital Computer

src: i.ytimg.com

The Saturn Launch Vehicle Digital Computer (LVDC) was a computer that provided the autopilot for the Saturn V rocket from launch to Earth orbit insertion. Designed and manufactured by IBM's Electronics Systems Center in Owego, N.Y., it was one of the major components of the Instrument Unit, fitted to the S-IVB stage of the Saturn V and Saturn IB rockets. The LVDC also supported pre- and post-launch checkout of the Saturn hardware. It was used in conjunction with the Launch Vehicle Data Adaptor (LVDA) which performed signal conditioning to the sensor inputs to the computer from the launch vehicle.

Video Saturn Launch Vehicle Digital Computer

Hardware

The LVDC was capable of executing 12190 instructions per second. For comparison, a 2012-era microprocessor can execute 4 instructions per cycle at 3 GHz, achieving 12 billion instructions per second, one million times faster.

Its master clock ran at 2.048 MHz, but operations were performed bit-serially, with 4 cycles required to process each bit, 14 bits per phase, and 3 phases per instruction, for a basic time of 168 cycles = 82 ?s for a simple add. (A few instructions, such as multiply or divide, took a few times this value.)

Memory was in the form of 13-bit syllables, each with a 14th parity bit. Instructions were one syllable in size, while data words were two syllables (26 bits). Main memory was random access magnetic core, in the form of 4,096-word memory modules. Up to 8 modules provided a maximum of 32,768 words of memory. Ultrasonic delay lines provided temporary storage.

For reliability, the LVDC used triple-redundant logic and a voting system. The computer included three identical logic systems. Each logic system was split into a seven-stage pipeline. At each stage in the pipeline, a voting system would take a majority vote on the results, with the most popular result being passed on to the next stage in all pipelines. This meant that, for each of the seven stages, one module in any one of the three pipelines could fail, and the LVDC would still produce the correct results. The result was an estimated reliability of 99.6% over 250 hours of operation, which was far more than the few hours required for an Apollo mission.

With four memory modules, giving a total capacity of 16,384 words, the computer weighed 72.5 lb (32.9 kg), was 29.5×12.5×10.5 inches in size (74×32×27 cm) and consumed 137 watts.

Maps Saturn Launch Vehicle Digital Computer

Software

LVDC instruction words were split into a 4-bit opcode field (least-significant bits) and a 9-bit operand address field (most-significant bits). This left it with sixteen possible opcode values when there were eighteen different instructions: consequently, three of the instructions used the same opcode value, and used two bits of the address value to determine which instruction was executed.

Memory was broken into 256-word "sectors". 8 bits of the address specified a word within a sector, and the 9th bit selected between the software-selectable "current sector" or a global sector called "residual memory".

The eighteen possible LVDC instructions were:

Unlike the Apollo Guidance Computer software, the software which ran on the LVDC seems to have vanished. While the hardware would be fairly simple to emulate, the only remaining copies of the software are probably in the core memory of the Instrument Unit LVDCs of the remaining Saturn V rockets on display at NASA sites.

src: www.ibiblio.org

Interrupts

The LVDC could also respond to a number of interrupts triggered by external events.

For a Saturn IB these interrupts were:

For a Saturn V these interrupts were:

src: curious-droid.com

Construction

The LVDC was approximately 30 inches wide, 12.5 inches high, and 10.5 inches deep and weighed 80 pounds. The chassis was made of magnesium-lithium alloy LA 141, chosen for its high stiffness, low weight, and good vibration damping characteristics. The chassis was divided into a 3 x 5 matrix of cells separated by walls through which coolant was circulated to remove the 138 Watts of power dissipated by the computer. Slots in the cell walls held "pages" of electronics. The decision to cool the LVDC by circulating coolant through the walls of the computer was unique at the time and allowed the LVDC and LVDA (part-cooled using this technique) to be placed in one cold plate location due to the three dimensional packaging. The cold plates used to cool most equipment in the Instrument Unit were inefficient from a space view although versatile for the variety of equipment used. The alloy LA 141 had been used by IBM on the Gemini keyboard, read out units, and computer in small quantities and the larger frame of the LVDC was produced from the largest billets of LA 141 cast at the time and subsequently CNC machined into the frame.

A page consisted of two 2.5 x 3-inch boards back to back and a magnesium-lithium frame to conduct heat to the chassis. The 12-layer boards contained signal, power, and ground layers and connections between layers were made by plated-through holes.

Up to 35 alumina squares 0.3 x 0.3 x 0.070 inch could be reflow soldered to a board. These alumina squares had conductors silk screened to the top side and resistors silk-screened to the bottom side. Semiconductor chips 0.025 x 0.025 inch, each containing either one transistor or two diodes, were reflow soldered to the top side. The complete chip was called a unit logic device. Copper balls were used for contacts between the chips and the conductive patterns.

The hierarchy of the electronic structure is shown in the following table.

src: upload.wikimedia.org

Gallery

src: www.ibiblio.org

See also

• Gemini Spacecraft On-Board Computer (OBC)

src: content.jdmagicbox.com

References

• IBM, Saturn V Launch Vehicle Digital Computer, Volume One: General Description and Theory, 30 November 1964
• IBM, Saturn V Guidance Computer, Semiannual Progress Report, 1 Apr. - 30 Sep. 1963, 31 October 1963; archive
• Bellcomm, Inc, Memory Requirements for the Launch Vehicle Digital Computer (LVDC), April 25, 1967
• Boeing, Saturn V Launch Vehicle Guidance Equations, SA-504, 15 July 1967
• Walter Haeussermann, Description and Performance Of The Saturn Launch Vehicle's Navigation, Guidance And Control System, July 1970
• NASA Marshall Spaceflight Center, Saturn V Flight Manual SA-503, 1 November 1968
• NASA Marshall Spaceflight Center, Skylab Saturn IB Flight Manual, 30 September 1972
• M.M. Dickinson, J.B. Jackson, G.C. Randa. IBM Space Guidance Center, Owego, NY. "Saturn V Launch Vehicle Digital Computer and Data Adapter." Proceedings of the Fall Joint Computer Conference, 1964, pages 501-516.
• S. Bonis, R. Jackson, and B. Pagnani. IBM Space Guidance Center, Owego, NY. "Mechanical and Electronic Packaging for a Launch-Vehicle Guidance Computer." International Electronic Circuit Packaging Symposium 21-24 August 1964. Pages 226-241.
• IBM, Apollo Study Report, Volume 2. IBM Space Guidance Center, Owego, NY, 1 October 1963. 133 pages. Also available on Virtual AGC (search for 63-928-130).
• NASA MSFC, Astrionics System Handbook Saturn Launch Vehicles NASA Marshall Space Flight Center, 1 Nov 1968. MSFC No. IV-4-401-1. IBM No. 68-966-0002. 419 pages. Chapter 15 is about the LVDC and Launch Vehicle Data Adapter.

src: i.ytimg.com

Notes

src: content.jdmagicbox.com

External links

• IBM Archives: Saturn Guidance Computer
• High-resolution photos of LDVC components at the SpaceAholic collection of Apollo Lunar Module and Saturn V spaceflight artifacts

Source of the article : Wikipedia