Master/slave (technology)

src: www.prosoft-technology.com

Master/slave or primary/replica is a model of communication where one device or process has unidirectional control over one or more other devices. In some systems a master is selected from a group of eligible devices, with the other devices acting in the role of slaves.

In the context of motor control, the master/slave configuration is used for load sharing purposes when two identical motors connected to two different drives are coupled to a common load. One drive is defined as the master and is configured for running in the speed-control mode whereas the other defined as slave is configured for running in torque-control mode.

Video Master/slave (technology)

Examples

• In database replication, the master database is regarded as the authoritative source, and the slave databases are synchronized to it.
• Hydraulic and pneumatic systems may use a master cylinder to control one or several slave cylinders.
• Peripherals connected to a bus in a computer system.
• Railway locomotives operating in multiple (for example: to pull loads too heavy for a single locomotive) can be referred to as a master/slave configuration - with the operation of all locomotives in the train slaved to the controls of the first locomotive. See - Multiple-unit train control.
• Duplication is often done with several cassette tape or compact disc recorders linked together. Operating the controls on the master triggers the same commands on the slaves, so that recording is done in parallel.
• In parallel ATA hard drive arrangements, the terms master and slave are used but neither drive has control over the other. The terms also do not indicate precedence of one drive over the other in most situations. "Master" is merely another term for device 0 and "slave" indicates device 1.
• Rmpi package in R is a standard master/slaves programming model.
• On the Macintosh platform, rebooting into Target Disk Mode allows one computer to operate as a dumb disk enclosure presenting its storage devices to another via SCSI, FireWire, or Thunderbolt, essentially a slave mode bridge.
• A master clock that provides time signals used to synchronize one or more slave clocks as part of a clock network.

Maps Master/slave (technology)

Terminology concerns

Because the terms "master" and "slave" evoke the practice of slavery, there have been efforts to replace them with others.

One alternative for databases is "primary" and "replica", which is used in the documentation from IBM, Microsoft, Engine Yard, Amazon Web Services, and ACM as well as in Python, Django,Drupal and MediaWiki (which still uses "master").

In December 2017, the Internet Systems Consortium decided to allow the words "primary" and "secondary" as a substitute for master/slave terminology in their DNS server software BIND.

In 2003, the County of Los Angeles in California asked that manufacturers, suppliers and contractors stop using "master" and "slave" terminology on products; the county made this request "based on the cultural diversity and sensitivity of Los Angeles County". Following outcries about the request, the County of Los Angeles issued a statement saying that the decision was "nothing more than a request". Following the controversy, Global Language Monitor selected the term "master/slave" as the most politically incorrect word of 2004.

src: www.prosoft-technology.com

See also

src: i.ytimg.com

References

Source of the article : Wikipedia